String Sizing Method

Sizing help

The string sizing method

No printer? No problem. Find your P-tainer size in about 5 minutes with a piece of string and a ruler.

What you'll need

Three things from around the house

About 6 inches of stringA shoelace, thread, dental floss or a thin strip of paper. Anything that won't stretch.
A pen or markerTo mark where the string meets.
A ruler in millimetersAny metric ruler or tape measure works. No ruler? Our free printable sizing guide has a 15 cm ruler along the bottom. Print it at 100% / actual size.

How to measure

Five quick steps

  1. Start softWhile flaccid, pull any foreskin back behind your glans (the head).
  2. Find your Good Fit lineIt's about 1/3 to 1/2 of the way down your glans. That's where the opening of your P-tainer will sit.
  3. Wrap the stringLoop it once around your glans right at the Good Fit line. Snug, not tight. Mark the spot where the string meets its end.
  4. Measure itLay the string flat along your ruler and read the length from the end to your mark, in millimeters.
  5. Find your size belowMeasure two or three times and use the number you get most often. Between two sizes? Choose the smaller one. We've found it's typically more comfortable for the P-tainer to cover less of your glans rather than more. Still not sure? Contact us and we'll help.
Diagram of the glans showing the Small, Good Fit and Big lines

Measure at the green Good Fit line. Too high and you'll size too small; too low and you'll size too big.

Your size

String length to P-tainer size

Your string lengthYour sizeP-tainer opening
Under 88 mm626 mm. Contact us and we'll help.
88 to 93 mm828 mm
94 to 100 mm1030 mm
101 to 106 mm1232 mm
107 to 112 mm1434 mm
113 to 118 mm1636 mm
119 mm or more18+38 mm and up. Contact us and we'll help.
Want to double-check? Our printable sizing guide has circles that are the actual size of each P-tainer, so you can test the fit directly. The Starter Kit also includes a Demo P-tainer in every standard size to try on at home.